深圳市广辉电子有限公司

DC operated slim type card relays ■ Features
Rated thermal currrent 5 Amps. *Thin, miniature size and light weight
The mounting space on the PC board
■ Description can be reduced.
The RB104 and 105 relays are designed * UL, CSA and TüV approved
for printed circuit board use. * Low power consumption
These relays are extremely thin (5mm) They can be operated by means of
and so, can be densely mounted on PC non-polarity magnet.
boards. As a result, PC board size and * SIL terminal arrangement
AF93-205
cost can be greatly reduced. SIL (Single-side In-Line lead) package
RB105 AF95-567 Socket TP04
Employing of bifurcated contacts allows the relays to be mounted easily
ensure high Contact reliability, allowing on PC board.
the RB104,105 relays to be used in low- *Fluxtight construction
level circuits. *Immersion cleanable
■ Ordering information
Coil voltages are available in ranges
Specify the following:
from 4.5V to 24V DC.
1. Type number
■ Types and ratings ■ Type number nomenenclature
RB 10 4-DE
Type Ordering Power Rated Pick-up Thermal Make and
code consumption voltage voltage current break current Operating coil voltage
(res.load) DC: 4.5 V DC
DY: 5V DC
DA: 6V DC
RB104 RB104-■ 120mW 4.5, 5, 6 70% of  rated 5A 5A at 250V AC
DD: 9V DC
9, 12 voltage or less 5A at 30V DC
DB: 12V DC
RB105 RB105-■ 200mW 24V DC
DE: 24V DC
Watt loss
Note: Enter the coil voltage code in the ■ mark as follow
4: 120mW
4.5V DC: DC,  5V DC: DY, 6V DC: DA, 9V DC: DD, 12V DC: DB, 24V DC: DE
5: 200mW
Contact arrengement
10: 1NO
Basic type
■ Specifications
Operating time 10ms or less at rated voltage
■ Approvals
Release time 5ms or less at rated voltage
* UL, CSA and TüV
UL file No. E44592
Dielectric strength 750V AC rms.  1 min. between open contacts
CSA file No. LR20479
2,000V AC rms.  1 min. between contact and coil
TüV license No. R9551729
Stray electrostatic capacity Approx. 1.4pF between contact and coilImpulse 4,500V or more 1.2 × 50μs between contact and coil Ratings
Insulation resistance 100M? at 500V DC megger
Voltage Resistive load Inductive load
–
Electrical durability AC 100,000 operations at 220V AC 2A, inductive load 120V AC 1A
130,000 operations at 220V AC 3A, resistive load
240V AC 5A –
DC 150,000 operations at 24V DC 1A, inductive load
  30V DC 5A 2A (15ms)
100,000 operations at 24V DC 5A, resistive load
120V DC 0.5A 0.2A (15ms)
Mechanical durability 20 million operations
Ambient temperature –40°C to +70°C(no icing)
特点
    矮小细长的空间节省型产品
    该卡式继电器是高度12.3mm×宽度5mm×长度21mm的细长型产品。特别是在高度方面和本公司以往产品相比减少了5.7mm，即使是在插入插座后也比以往的单个产品高度低1mm，为设备的小型化做出了贡献。
    触头额定电流小型化且实现了5A
    卡式继电器RB10 □的额定通电电流小型化且实现了5A。可以对应高负载开关操作。
    采用双触头
    在触头部分采用的是接触立刻开性良好的双触头结构，因此可以对应更高可靠性控制需求。
    产品阵容中还包括高灵敏度型120mW 产品
    在200mW产品的基础上进一步增加了高灵敏度的120mW产品。
    采用了可自动的清洗的塑料密封结构
    通过SIL型端子排列可以更方便的进行印刷电路板设计
    备有专用插座TP04
    UL・CSA・产品
    取得了加强绝缘IEC1131-2）