深圳市广辉电子有限公司

概述:

The MAX705–MAX708/MAX813L microprocessor (µP) supervisory circuits reduce the complexity and number of components required to monitor power-supply and battery functions in µP systems. These devices significantly improve system reliability and accuracy compared to separate ICs or discrete components.

The MAX705/MAX706/MAX813L provide four functions:

1. A reset output during power-up, power-down, and brownout conditions.
2. An independent watchdog output that goes low if the watchdog input has not been toggled within 1.6 seconds.
3. A 1.25V threshold detector for power-fail warning, low-battery detection, or for monitoring a power supply other than +5V.
4. An active-low manual-reset input.

The MAX707/MAX708 are the same as the MAX705/MAX706, except an active-high reset is substituted for the watchdog timer. The MAX813L is the same as the MAX705, except RESET is provided instead of active-low RESET.

Two supply-voltage monitor levels are available: The MAX705/MAX707/MAX813L generate a reset pulse when the supply voltage drops below 4.65V, while the MAX706/MAX708 generate a reset pulse below 4.40V. All four parts are available in 8-pin DIP, SO and µMAX® packages.

关键特性:

• Available in Tiny µMAX Package
• Guaranteed RESET Valid at V_CC = 1V
• Precision Supply-Voltage Monitor
  • 4.65V in MAX705/MAX707/MAX813L
  • 4.40V in MAX706/MAX708
• 200ms Reset Pulse Width
• Debounced TTL/CMOS-Compatible Manual-Reset Input
• Independent Watchdog Timer—1.6s Timeout (MAX705/MAX706)
• Active-High Reset Output (MAX707/MAX708/MAX813L)
• Voltage Monitor for Power-Fail or Low-Battery Warning