- 非IC关键词
深圳市广辉电子有限公司
- 卖家积分:营业执照:未审核经营模式:所在地区:广东 深圳企业网站:
http://www.liveic.cn
收藏本公司 人气:3672031
企业档案
- 相关证件:
- 会员类型:
- 会员年限:17年
- 阿库IM:
- 地址:深圳市深南东路金城大厦3-10-A//柜台:深圳市华强北路新华强电子世界Q3B026室
- 传真:0755-82534577
- E-mail:659974144@qq.com
产品分类
- 其他IC(5)
- 整流二极管(15)
- 稳压二极管(14)
- 开关二极管(10)
- 桥堆/整流桥/桥式整流器(25)
- 硅粒子/硅堆/高压二极管(3)
- 检波二极管(1)
- 阻尼二极管(2)
- 变容二极管(2)
- 快/超快/特快恢复二极管(24)
- 瞬态(变)抑制二极管(15)
- ESD静电二极管(6)
- 肖特基二极管(28)
- PIN二极管(1)
- 单向可控硅(晶闸管)(9)
- 双向可控硅(晶闸管)(8)
- 可控硅(晶闸管)模块(41)
- 贴片(片式/SMD)电容(15)
- 铝电解电容(9)
- 钽电解电容(9)
- 安规电容(1)
- 超级(法拉/黄金)电容(2)
- 马达(启动)电容(59)
- 瓷片(瓷介)电容(2)
- 陶瓷电容(5)
- 有机薄膜介质电容(1)
- 聚丙烯(CBB)电容(13)
- 纸膜复合电容(纸介)电容(1)
- 自愈式电容器(4)
- 三脚电容器(1)
- 油浸电容(3)
- 其他电容(7)
- 贴片晶振(5)
- 晶振(普通)(6)
- 表振(晶)/钟振(晶)(3)
- 声表面器件(1)
- 其它逆变器(3)
- 手机/移动通信设备天线(2)
- 红外线发射管(6)
- 红外线接收头(18)
- 光电光耦合器(光耦)(58)
- 光发射机(1)
- 光纤收发器(1)
- 光纤藕合器(1)
- 激光头(1)
- 其他光电子、激光器件(2)
- 其他编码器(1)
- 监控系统(3)
- 无线收发器(模块)(1)
- 其它电子测量仪器(4)
- 其他设备(1)
相关产品
产品信息
供应TJA1050T CAN总线驱动器IC
FEATURES
· Fully compatible with the “ISO 11898” standard
· High speed (up to 1 Mbaud)
· Very low ElectroMagnetic Emission (EME)
· Differential receiver with wide common-mode range for
high ElectroMagnetic Immunity (EMI)
· An unpowered node does not disturb the bus lines
· Transmit Data (TXD) dominant time-out function
· Silent mode in which the transmitter is disabled
· Bus pins protected against transients in an automotive
environment
· Input levels compatible with 3.3 V and 5 V devices
· Thermally protected
· Short-circuit proof to battery and to ground
· At least 110 nodes can be connected
GENERAL DESCRIPTION
The TJA1050 is the interface between the Controller Area
Network (CAN) protocol controller and the physical bus.
The device provides differential transmit capability to the
bus and differential receive capability to the CAN
controller.
The TJA1050 is the third Philips high-speed CAN
transceiver after the PCA82C250 and the PCA82C251.
The most important differences are:
· Much lower electromagnetic emission due to optimal
matching of the output signals CANH and CANL
· Improved behaviour in case of an unpowered node
· No standby mode.
This makes the TJA1050 eminently suitable for use in
nodes that are in a power-down situation in partially
powered networks.