- 非IC关键词
深圳市广辉电子有限公司
- 卖家积分：
营业执照：未审核经营模式：所在地区：广东 深圳企业网站：
http://www.liveic.cn
收藏本公司 人气：3675800
企业档案
- 相关证件：
- 会员类型：
- 会员年限：17年
- 陈树辉
- 电话：13686868407
- 手机：13686868407
- 阿库IM：
- 地址：深圳市深南东路金城大厦3-10-A//柜台:深圳市华强北路新华强电子世界Q3B026室
- 传真：0755-82534577
- E-mail：659974144@qq.com
产品分类
优势库存(300)普通库存(33538)集成电路(IC)(5)电源IC(217)半导体存储器(20)二极管(146)三极管(109)单片机(14)电容器(132)电阻器(67)电感器(113)电位器(75)电源/稳压器(260)石英晶体器件(15)声表面器件(28)连接器/接插件(93)放大器(97)电声元件(32)天线(2)光电子/光纤/激光(88)LED(10)PLC/可编程控制器(1)编码器(1)安防监控器材(3)IT/电子产品成套件(1)电子测量仪器(4)电子产品制造设备(1)仪器/仪表(67)五金/工具(5)其他未分类(506)
- 其他IC(5)
- 整流二极管(15)
- 稳压二极管(14)
- 开关二极管(10)
- 桥堆/整流桥/桥式整流器(25)
- 硅粒子/硅堆/高压二极管(3)
- 检波二极管(1)
- 阻尼二极管(2)
- 变容二极管(2)
- 快/超快/特快恢复二极管(24)
- 瞬态(变)抑制二极管(15)
- ESD静电二极管(6)
- 肖特基二极管(28)
- PIN二极管(1)
场效应管MOSFET(205)可控硅IGBT(58)
- 单向可控硅(晶闸管)(9)
- 双向可控硅(晶闸管)(8)
- 可控硅(晶闸管)模块(41)
- 贴片(片式/SMD)电容(15)
- 铝电解电容(9)
- 钽电解电容(9)
- 安规电容(1)
- 超级(法拉/黄金)电容(2)
- 马达(启动)电容(59)
- 瓷片(瓷介)电容(2)
- 陶瓷电容(5)
- 有机薄膜介质电容(1)
- 聚丙烯(CBB)电容(13)
- 纸膜复合电容(纸介)电容(1)
- 自愈式电容器(4)
- 三脚电容器(1)
- 油浸电容(3)
- 其他电容(7)
- 贴片晶振(5)
- 晶振(普通)(6)
- 表振(晶)/钟振(晶)(3)
- 声表面器件(1)
开关(255)
传感器(559)
保险丝(50)普通电池/蓄电池/动力电池(1)变压器(333)变送器(4)继电器(1212)
逆变器(3)
- 其它逆变器(3)
- 手机/移动通信设备天线(2)
- 红外线发射管(6)
- 红外线接收头(18)
- 光电光耦合器(光耦)(58)
- 光发射机(1)
- 光纤收发器(1)
- 光纤藕合器(1)
- 激光头(1)
- 其他光电子、激光器件(2)
- 其他编码器(1)
- 监控系统(3)
- 无线收发器（模块）(1)
- 其它电子测量仪器(4)
- 其他设备(1)
您的当前位置：深圳市广辉电子有限公司 > 元器件产品
询价相关产品
产品信息
供应德州仪器的升压- 降压稳压器IC TPS63021DSJ
电源管理 > DC/DC 开关稳压器 > 转换器（集成开关） > 降压/升压转换器 >
类别 PMIC - 稳压器 - DC DC 开关稳压器
描述 IC REG BUCK BST SYNC 3.3V 14VSON
制造商 Texas Instruments
类型 降压（降压），升压（升压）
输出类型 固定
输出数 1
电压_输出 3.3V
电压_输入 1.8 V ~ 5.5 V
PWM类型 电流模式
频率_开关 2.4MHz
电流_输出 3A
同步整流器 是
工作温度 -40°C ~ 85°C
安装类型 表面贴装
封装/外壳 14-VSON 裸露焊盘，14-HVSON
包装 剪切带 (CT)
封装 14-VSON
参数 与其它产品相比 降压/升压转换器
描述
The TPS6302x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 3A while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to 2.5V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 4A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 14-pin QFN PowerPAD package measuring 3 × 4 mm (DSJ).
Capacitor C4 and resistor R1 are added for improved load transient performance.
特性
Up to 96% Efficiency
3A Output Current at 3.3V in Step Down Mode (VIN = 3.6V to 5.5V)
More than 2A Output Current at 3.3V in Boost Mode (VIN > 2.5V)
Automatic Transition Between Step Down and Boost Mode
Dynamic Input Current Limit
Device Quiescent Current less than 50μA
Input Voltage Range: 1.8V to 5.5V
Fixed and Adjustable Output Voltage Options from 1.2V to 5.5V
Power Save Mode for Improved Efficiency at Low Output Power
Forced Fixed Frequency Operation at 2.4MHz and Synchronization
Possible
Smart Power Good Output
Load Disconnect During Shutdown
Overtemperature Protection
Overvoltage Protection
电源管理 > DC/DC 开关稳压器 > 转换器（集成开关） > 降压/升压转换器 >
类别 PMIC - 稳压器 - DC DC 开关稳压器
描述 IC REG BUCK BST SYNC 3.3V 14VSON
制造商 Texas Instruments
类型 降压（降压），升压（升压）
输出类型 固定
输出数 1
电压_输出 3.3V
电压_输入 1.8 V ~ 5.5 V
PWM类型 电流模式
频率_开关 2.4MHz
电流_输出 3A
同步整流器 是
工作温度 -40°C ~ 85°C
安装类型 表面贴装
封装/外壳 14-VSON 裸露焊盘，14-HVSON
包装 剪切带 (CT)
封装 14-VSON
参数 与其它产品相比 降压/升压转换器
描述
The TPS6302x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 3A while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to 2.5V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 4A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 14-pin QFN PowerPAD package measuring 3 × 4 mm (DSJ).
Capacitor C4 and resistor R1 are added for improved load transient performance.
特性
Up to 96% Efficiency
3A Output Current at 3.3V in Step Down Mode (VIN = 3.6V to 5.5V)
More than 2A Output Current at 3.3V in Boost Mode (VIN > 2.5V)
Automatic Transition Between Step Down and Boost Mode
Dynamic Input Current Limit
Device Quiescent Current less than 50μA
Input Voltage Range: 1.8V to 5.5V
Fixed and Adjustable Output Voltage Options from 1.2V to 5.5V
Power Save Mode for Improved Efficiency at Low Output Power
Forced Fixed Frequency Operation at 2.4MHz and Synchronization
Possible
Smart Power Good Output
Load Disconnect During Shutdown
Overtemperature Protection
Overvoltage Protection
Available in a 3 × 4-mm, QFN-14 Package
